Header



UTD Z-Side-Mount System

Z-Side-Mount Diving System is essentially “stage bottle” or side mount diving but adhering to the UTD/DIR/Hogarthian principles. It places the scuba cylinders under your arm/s, instead of mounting it or them on your back. The Z-Side Mount Diving System configuration allows you to realize the liberation and ease associated with not having the cylinder/s and/or weights on your back. Side-Mount diving was born in cave diving, however the configuration was often incompatible with UTD/DIR/Hogarthian configuration. The Z-Side-Mount System configuration now allows for full compatibility, integrated, scalable and unification of the team, when side-mount diving is needed. For example, when recreational, technical or rebreather diving from a zodiac, or kayak or when one needs to make a difficult shore entry, Z-Side-Mount Diving System has proven to be a viable alternate to back-mounting your cylinder/s. Of course when "advanced side mount cave diving", meaning you are crawling around in some really tiny places, or even when do a general cave dive, side-mounting the cylinders or rebreather can be of great advantage, especially when one can now stay consistent and unified in their configuration, skills and approach towards the dive. Another area that has taken advantage of Z-Side-Mount Diving System configuration is divers with disabilities or physical limitations and they need to remove the weight off their backs while on the surface. The reason Z-Side-Mount Diving System configuration has such advantages for divers in the above examples is that it allows you to put the cylinders in the water prior to entering the water and then attaching them to the diver prior to descending.

Z-Side-Mount Diving System takes advantage of the the cylinders and/or rebreather mounted on the side but remains “Team” oriented by still having the donateable long hose, necklace hose, BCD inflation hose and dry suit hose - if needed all are fed by the cylinders that are plugged into the distribution block (Z-Manifold). The Z-Side-Mount Diving System configuration allows for this. The system consists of a Z-Harness, a Z-Manifold, a Z-Trim Device/Z-Plus-Trim Device and Z-Weights. These components can be used together independently to provide you with an Z-Ultimate experience.>

Benefits of the UTD’s Z-Side-Mount Diving System Configuration

  • Z-Harness (a basic Side-Mount Harness) can be custom fit to each diver. The advantages include comfort, ease of movement, simplicity, and minimal drag.
  • Z-Trim Device/Z-Plus-Trim Device/Delta Trim Device are all low profile, streamline "buoyancy" devices which enable buoyancy, balance and trim control resulting in a more streamlined profile making moving through the water easier and more efficient.
  • Z-Manifold is a extremely robust distribution block which allows one to have one or two "inputs" and up to 6 outputs. This allows the diver to plug in the gases of choice and then provide the diver with outputs as needed. A donateable 7ft/2m long hose, a 22"/56cm necklace, a BCD hose, a dry suit hose and even drive hose for the manual diluent injector on a MX-Z side mounted rebreather. 
  • Z-System Side-Mount Diving makes is easier for entries and less stress on the body by staging tanks in the water. Great for divers with physical limitations.
  • A safe option for air management as there is easy access to cylinder valve(s), first stage(s) and alternate regulator should a problem arise.
  • 100% compatible and integrated into DIR/UTD back mounted configuration and rebreather configuration and our signature "team" diving approach.
  • Less bulk for easier dive travel.
  • Allows for seemless, easy and comfortable MIXED TEAM DIVING (Back-Mount, Rebreather and Side-mount Diving are now compatible)

Z-System Recreational Single Tank

 

Everything you need to go recreational single tank Z-Diving. This system is designed for recreational divers who want to take a single tank side mount diving and includes your Z-Harness, Z-Trim Device, Z-Manifold, Z-Manifold Cover, Z-Stage Bottle Kit and all the hoses and fittings you need. All you have to decided is if you want the permanent stage bottle kit or travel stage bottle kit

Features and Benefits

  • Designed for Recreational Z-Diving
  • Complete Z-Harness with SS plates, webbing, d-rings and tank bungee
    • Can accommodate 1 or 2 tanks on either side of diver
  • Z-Trim Device
    • 20lbs/9kgs of lift
    • Built in Weight pockets
  • Z-Manifold (8 ports) for attaching up to 6 outputs and 2 inputs
  • Z-Manifold Hose Kit
    • Female Q6 Input Hose 
    • 5'/1.52m Long Hose
    • 24"/65cm Necklace Hose
    • 22"/56cm BCD Hose
  • Z-Stage Bottle Harness (Permanent or Travel ..your choice)
  • Z-Stage Bottle Hose Kit
    • Male QC6 Stage Hose
    • Over Pressure Relief Valve (OPV)
    • High Pressure Hose for stage bottle SPG

Z-Plus System Recreational Single Tank

Everything you need to go recreational single tank Z-Diving. This system is designed for recreational divers who want to tank a single take side mount diving and includes your Z-Harness, Z-Plus Trim Device, Z-Manifold, Z-Stage Bottle Kit and all the hoses and fittings you need. All you have to decided is if you want the permanent stage bottle kit or travel stage bottle kit

Features and Benefits

  • Designed for Recreational Z-Diving
  • Complete Z-Harness with SS plates, webbing, d-rings and tank bungee
    • Can accommodate 1 or 2 tanks on either side of diver
  • Z-Plus Trim Device
    • Upto 50lbs/21kgs of lift
  • Z-Manifold (8 ports) for attaching up to 6 outputs and 2 inputs
  • Z-Manifold Hose Kit
    • Female Q6 Input Hose 
    • 5'/1.52m Long Hose
    • 24"/65cm Necklace Hose
    • 22"/56cm BCD Hose
  • Z-Stage Bottle Harness (Permanent or Travel ..your choice)
  • Z-Stage Bottle Hose Kit
    • Male QC6 Stage Hose
    • Over Pressure Relief Valve (OPV)
    • High Pressure Hose for stage bottle SPG

Z-System Cave / Wreck / Technical Double Tanks

Everything you need to go cave or tech double tank Z-Diving. This system is designed for cave, wreck and or technical divers who want to take double tanks side mount diving and includes your Z-Harness (Side-mount harness), Z-Trim Device, Z-Manifold, Z-Manifold Cover, 2 x Z-Stage Bottle Kit and all the hoses and fittings you need. All you have to decided is if you want the permanent stage bottle kit or travel stage bottle kit

Features and Benefits

  • Designed for Cave/Wreck/Tech Z-Diving
  • Complete Z-Harness with SS plates, webbing, d-rings and tank bungee
    • Can accommodate 1 or 2 tanks on either side of diver
  • Z-Trim Device
    • 20lbs/9kgs of lift
    • Built in Weight pockets
  • Z-Manifold (8 ports) for attaching up to 6 outputs and 2 inputs
  • Z-Manifold Hose Kit
    • 2 x Female Q6 Input Hoses 
    • 7'/2.0m Long Hose
    • 24"/65cm Necklace Hose
    • 22"/56cm BCD Hose
  • 2 x Z-Stage Bottle Harness (Permanent or Travel ..your choice)
  • 2 x Z-Stage Bottle Hose Kit
    • Male QC6 Stage Hose
    • Over Pressure Relief Valve (OPV)
    • High Pressure Hose for stage bottle SPG

Z-Plus System Cave / Wreck / Technical Double Tank

Z-PlusZplus

 

Everything you need to go Cave/Wreck/Tech double tank Z-Diving. This system is designed for cave or wreck or technical divers who want to take double tanks side mount diving and includes your Z-Harness, Z-Plus Trim Device, Z-Manifold,  2 x Z-Stage Bottle Kit and all the hoses and fittings you need. All you have to decided is if you want the permanent stage bottle kit or travel stage bottle kit

Features and Benefits

  • Designed for Cave/Wreck/Tech Z-Diving
  • Complete Z-Harness with SS plates, webbing, d-rings and tank bungee
    • Can accommodate 1 or 2 tanks on either side of diver
  • Z-Plus Trim Device
    • 50lbs/21kgs of lift
  • Z-Manifold (8 ports) for attaching up to 6 outputs and 2 inputs
  • Z-Manifold Hose Kit
    • 2 x Female Q6 Input Hose 
    • 7'/2.0m Long Hose
    • 24"/65cm Necklace Hose
    • 22"/56cm BCD Hose
  • 2 x Z-Stage Bottle Harness (Permanent or Travel ..your choice)
  • 2 x Z-Stage Bottle Hose Kit
    • Male QC6 Stage Hose
    • Over Pressure Relief Valve (OPV)
    • High Pressure Hose for stage bottle SPG

UTD MX-Z Side-Mount mCCR Rebreather

MX-ZMX-Z

 

This unit comes with the necessary components to configure your mCCR Rebreather in a standard MX System, however it allows the diver to quickly and easily side-mount or back-mount the Head/CO2 canister and Diluent Bailout tanks. So depending on the mission one can easily switch between side-mount diving (Z-System) or back-mount diving (UTD/DIR), even in-between the dives. This makes it a fantastic side-mount or back-mount exploration tool that can be used in a wide variety of applications and enviroments.

Price Includes:

UTD Custom KISS Canister & Head
5.5lb/2.5kg Co-Axial CO2 Scrubber and Canister
2 *  Breathing Loops w bayonets (1 for side-mount diving, and 1 for back-mount diving)
1 * Shrimp Bail Out Valve (BOV)
2 * JZ Back Mounted Counter Lungs (2 * 3L with water dump valve)
1 * O2 Delrin Injector with QC6 Female Quick Connection
1 * Dil Delrin Injector with QC6 Quick Connection and Isolator
1 * Custom Shearwater Predator independent PPO2 Handsets with OLED Display mounted on a Fischer Cable 
1 * Hardwired Shearwater Heads Up Display (HUD) 
2 * UTD Rebreather Tank Bands and tank clamps (fixed or travel)
1 * Tank Manifold with extended HP Isolator
3 * O2 Sensors

Accessories: 1 Male Quick Connection Fitting for LP, Calibration Kit

Z-System and Z-Plus System

Recreational Z-Side-Mount System - Front View

A. Single Side Mounted Stage Tank
B. Z-Side-mount Harness
C. Single Tank QC6 male plugged into QC6 Female manifold input
D. First stage attached to side-mount stage bottle
E. 7ft/2m or 5ft/1.5m Primary Long Hose Regulator - Std. UTD configuration
F. 22"/56cm Secondary Necklace Regulator - Std. UTD configuration
G. Pressure Gauge (SPG) or 6"/15cm H.P. hose
H. Stage Bottle Accessories Attachment D-Ring on Right and Left Armpits
I. Stage Bottle Accessories Attachment D-Ring on Right and Left Buttock area
J. Z-Side-mount Stage Bottle fixed harness kit
K. UTD X-Shorts for with pockets for accessories such as SMB and spool

 

Recreational Z-Side-Mount Sysytem - Back View

A. Single Stage Tank Side-Mounted
B. Z-Side-Mount Harness with webbing and plates. A standard Side Mount Harness
C. Z-Manifold to distribute the input gas. 8 ports - 2 inputs and 6 outputs.
D. Z-Side-mount Trim Device - Optional: Z-Plus or Delta Trim Device
E. QC6 Wet Plugable Input/Output to connect Stage bottle to Manifold Female Input to manifold.
F. LP Inflator/Deflator for the Z-Trim Device
G. First stage attached to stage bottle
H. 7'/2m or 5'/1.5m Primary Long hose regulator - Std. UTD configuration
I. 22"/56cm Secondary necklace hose regulator
J. Stage Bottle Accessories Attachment D-Ring on Right and Left Buttock area
K. Z-Side-mount Stage Bottle travel harness kit
L. Crotch Strap with Scooter Tow D-Ring on front.
M. Rear Dump valve and OPV



Checklist for configurations

Z-Side-mount System - Single Tank

For the Recreational diver

  • Z-Side-Mount Harness (Optional: A std Back plate with Z-Trim Device Adapter can be used)
  • Z-Side-Mount Trim Device or Z-Plus Trim Device or Delta Trim Device
  • Weights attached with Weight Pockets as needed
  • Z-Manifold - Distribute the gas to the various components
  • Z-Cover for Manifold (for Z-Trim only)
  • Left Side 22"/55cm LP Hose with QC6 Input
  • 7ft/2m or 5ft/1.5m Long Hose with Primary Regulator
  • 22'/55cm hose with a neck-laced Secondary Regulator
  • 22"/55cm LP Inflator hose
  • 30"/75cm Dry suit hose if needed

For the side-mount Stage Tank

  • Side-Mount Stage Kit - Travel or Fixed
  • Fist stage - Din Preferable
  • 6"/ 15cm HP Hose with SPG
  • 24"/65cm LP hose with QC6 Output
  • OPV for First stage
  • 40"/100cm LP with Second stage and Regulator Isolator Shutoff (Optional)

Double Tank Z-System - Technical/Cave/Rebreather System

 

For the diver

  • Z-Side_mount Harness (Optional: A std Back plate with Z-Trim Device Adapter)
  • Z-Side-mount Trim Device or Z-Plus-Trim Device or Delta Trim Device
  • Weights in Weight Pockets as needed
  • Z-Manifold - Distributes the gas to the various components
  • Z-Cover for Manifold (Only needed for Z-Trim Device)
  • Two (Left & Right Side) 22"/55cm LP Hose with QC6 Female Input
  • 7ft/2m Long Hose with Primary Regulator
  • 22'/55cm hose with a neck-laced Secondary Regulator
  • 22"/55cm LP Inflator hose
  • 30'/75cm Dry suit hose if needed

 

For Each Stage/Deco Tank - Minimum 2 needed

  • Stage/Deco Side-Mount Tank Kit - Travel or Fixed
  • DIN Fist stage
  • 6"/ 15cm HP Hose with SPG
  • 24"/65cm LP hose with QC6 Male Output
  • OPV for First stage
  • 40"/100cm LP with Second stage and Regulator Isolator Shutoff (Optional)

Z-Side-mount Harness - Download Owners Manual

 


Z-Trim Devices (Z-Plus or Delta) - Download Owners Manual


 

Z-Manifold - Download Owners Manual


 


Z-Stages - Download Owners Manual

 


Last Thing to Remember


Finer Points of Setting Up a Z-System

Setting Up Dedicated Side Mount Tanks for the Z-System

Adapting Z-Trim Devices & Z-Mainfold to a Backplate

UTD Z-Side-Mount BCD

A complete side mount diving BCD consisting of a Z-Side-Mount Harness and Z-Trim device and Z-Cover. This simple yet versatile side-mount BCD will allow you to configure anyway you choose to side mount dive. The system consists of:
  • UTD Z-Side-Mount Harness
  • UTD Z-Trim Device
  • UTD Z-Cover


 

 

UTD Z Plus Side-Mount BCD

A complete side mount diving BCD consisting of a Z-Side-mount Harness and Z-Plus Trim device. This simple yet versatile side-mount BCD will allow you to configure anyway you choose to side mount dive. The system consists of:
  • UTD Z-Side-mount Harness
  • UTD Z-Plus Trim Device

Z-Side-Mount Harness - A Std. Complete Side-mount Harness - Download Owners Manual

A side mount diving harness only consisting of a two stainless steel plates, one piece webbing, Shoulder D-Rings, hip d-rings left/right and front and back, plus the crotch strap font and back d-rings and a knife and sheath.  

Features and Benefits

  • Designed for Side-mount Diving and Z-Diving
  • Comes complete with SS plates, webbing, knife and sheath, d-rings and tank bungee
  • Can accommodates 1 or 2 tanks Side Mounted on either side

Stainless Steel Plate

  • UTD/DIR/Hogarthian style side-mount harness with one piece 2" nylon webbing
  • Stainless-steel D-rings and tri-glide stoppers for right and left shoulders, hips, front waist and butt area
  • Knife and sheath
  • Stainless-steel waist buckle
  • Adjustable crotch strap
  • 48" of 3/8" Bungee for tank plus two Bungee ends

 

Z-Trim Device - Download Owners Manual

Features and Benefits

  • Designed for Side-mount Diving (Z-Diving)
  • Recreational, Cave, Technical, Wreck, so much more
  • Streamline and Low profile
  • Power and oral inflator
  • Tucked in Right side Over pressure valve (OPV)
  • Designed in a triangular shape to provide lift where a side-mount diver requires it.
  • Baffled bladder to prevent bubble expansion when inflated.
  • Attachment tri-glides to attach to harness waist strap and back-strap ensuring diver is lifted from the waist
  • Low profile 90 degree robust elbow with low profile oval shaped corrugated hose.
  • Adapts and fits all style of side-mount harness (Razor) or back plates or soft harnesses. 

Specification

  • 1050 Denier Ballistic Cordura
  • Pleated and baffled bladder
  • 20lbs/9 kg Lift capacity
  • Easily adapted to Z-Side-Mount Harness, Razor harness or style side-mount harnesses
  • Also fits standard back plate with Adapter

Z-Plus Trim Device - Download Owners Manual

Features and Benefits

  • Designed for Side-mount Diving (Z-Diving)
  • Recreational, Cave, Technical, Wreck, Rebreather and so much more
  • Streamline and Low profile
  • Power and oral inflator
  • Tucked in Right side Over pressure valve (OPV)
  • Designed in a triangular shape to provide lift where a side-mount diver requires it.
  • Baffled and pleated bladder to prevent bubble expansion when inflated.
  • Attachment tri-glides to attach to harness waist strap and back-strap ensuring diver is lifted from the waist
  • Low profile 90 degree robust elbow with low profile oval shaped corrugated hose.
  • Adapts and fits all style of side-mount harness (Razor) or back plates or soft harnesses. 

Specification

  • 1050 Denier Ballistic Cordura
  • Pleated and baffled bladder
  • Upto 50lbs/21 kg Lift capacity
  • Easily adapted to Z-Side-Mount Harness, Razor harness or style side-mount harnesses
  • Also fits standard back plate with Adapter

Z-Manifold - Distribution Block - Download Owners Manual

Features and Benefits

  • Marine Grade Brass Distribution Manifold
  • Connects to a Z-Side-mount Harness or a Std Backplate (w/ adpater)
  • 8 ports for input or output
  • Connect your long hose, necklace hose, BCD hose and dry suit hose and even RB Diluent Feed hoses
  • Allows for 2 inputs and 6 outputs

Z-Manifold Cover - (for Z-Trim Device Only)

Z-Manifold Cover

Features and Benefits

  • Designed to protect the top plate and/or the Z-Manifold on the Z-Side-mount Harness
  • Super anti abrasion material
  • For Recreational, Cave, Technical, Wreck, so much more
  • Streamline and Low profile
  • Velcro attachment points makes it super easy to attach and detach
  • Allows easy access to the Z-Manifold if needed. 

Specification

  • 1050 Denier Ballistic Cordura with Rhino tough skin for protection
  • Easily adapted to Z-Side-Mount Harness, Razor harness or style side-mount harnesses

 


 

UTD 3000psi/200b Dedicated Side-Mount Right Tank Valve (Stage/Deco)

Features and Benefits

UTD valves and manifolds use a “radial” seal O-ring; this maintains a seal on the stem and inner diameter of the bonnet nut regardless of valve position.

Features and Benefits

  • 2Great for use when side mount diving yet can be converted for back-mount double tank diving by adding a Isolator - Modular 
  • This one is designed to be worned on the left side of the diver - Right handed handwheel when standing behind the tank
  • Shock Absorbing, Ribbed rubber hand-wheel with Stainless Steel Inserts so as not strip
  • O2 Clean and Compatible - Nitrox Ready
  • Compatible with DIN regulators and can accomodate STD with inserts
  • Constructed from rugged aircraft-grade brass
  • Safety Wheel Included
  • Modular - a Crossbar Isolator can be added 
  • Valve Thread Size: 3/4"- 14 NPSM
  • Service pressure: 3000 PSI/ 200 B

 

2

UTD 3000psi/200b Dedicated Side-Mount Left Tank Valve (Stage/Deco)

Features and Benefits

UTD valves and manifolds use a “radial” seal O-ring; this maintains a seal on the stem and inner diameter of the bonnet nut regardless of valve position.

Features and Benefits

  • 2Great for use when side mount diving yet can be converted for back-mount double tank diving by adding a Isolator - Modular 
  • This one is designed to be worned on the right side of the diver - Left handed handwheel when standing behind the tank
  • Shock Absorbing, Ribbed rubber hand-wheel with Stainless Steel Inserts so as not strip
  • O2 Clean and Compatible - Nitrox Ready
  • Compatible with DIN regulators and can accomodate STD with inserts
  • Constructed from rugged aircraft-grade brass
  • Safety Wheel Included
  • Modular - a Crossbar Isolator can be added 
  • Valve Thread Size: 3/4"- 14 NPSM
  • Service pressure: 3000 PSI/ 200 B

 

 

 

UTD Dedicated Side-Mount Stage/Deco Bottle Harness AL80/11L- Permanent - Download Owners Manual

Features and Benefits

  • 2Complete rigging needed to setup your cylinder at home as a z-stage bottle 
  • No Metal to metal
  • SS Snaps and Tank Straps
  • Two Thick Rubber bands

 

SM Fixed

UTD Dedicated Side-Mount Stage/Deco Bottle Harness AL80/11L- Travel - Download Owners Manual

Features and Benefits

  • 2Complete rigging needed to setup your cylinder at home as a z-stage bottle 
  • No Metal to metal
  • SS Snaps
  • Cam band and webbing Tank Strap
  • Two Thick Rubber bands

 


UTD Z-Stage Bottle Harness AL80/11L- Permanent - Download Owners Manual

Features and Benefits

  • Complete rigging needed to setup your cylinder at home as a z-stage bottle 
  • No Metal to metal
  • SS Snaps and Tank Straps
  • Two Thick Rubber bands

 

UTD Z-Stage Bottle Harness AL80/11L- Travel - Download Owners Manual

Features and Benefits

  • Complete rigging needed to setup your cylinder at home as a z-stage bottle 
  • No Metal to metal
  • SS Snaps
  • Cam band and webbing Tank Strap
  • Two Thick Rubber bands

 


UTD Signature Series Small Argon Tank Harness Mount Kit 

Features and Benefits

  • Easily attach to Harness
  • Remove/replace argon bottle easily
  • Allows argon bottle to ride lower 

 



UTD Signature Series Light Harness Mount Kit 

Features and Benefits

  • Easily attach to Harness
  • Remove/replace Light easily
  • Allows Light to ride lower 

 


 

UTD Z-Manifold to Backplate Adapter Features and Benefits - Download Owners Manual

  • Attaches the Z-manifold to a Standard Backplate Z-System harness
  • SS Plate

 

UTD Second Stage to QC6 Adapter

This adapter to allow any second stage to be attached to a Female QC6. This allows the diver to attach a standard Second Stage to any Z-System Stage Bottle Output Hose or QC6Male.

Features and Benefits

  • Allows you to attach any std 2nd stage to your QC6 Female
  • OS Adpater to the QC6 Female
  • Female QC6
  • Does Not Inlcude the 2nd Stage

 

UTD Soft V-Weight System

This soft V-weight pouch can be attached to the Z-Harness to add 8lbs/3,5 kg of weight up the divers spin. It is soft to still allow flexibility of the diver.

Features and Benefits

  • Attach to any Z-System harness
  • Adds weight above the waist improving trim
  • Fill with Lead Shot
  • 8lbs/3.5kg

 

UTD Z-Trim Device to Back plate Adapter

This adapter to allows you to attach a Z-Trim Device to a Standard back plate The Z-Plus Trim Device will attach to a back plate with standard bolt kit and this adapter is unnecessary.

Features and Benefits

  • Adapter allows the Z-Trim Device to fit any SS or AL Backplate or softpak backpad with 11" centers
  • Comes with carriage bolts and wing nuts. 

 

Single Tank Adapter STA

Use a this to attach to a Z-Trim Device and and have a single back mounted tank. 

  • Attach to any Z-Harness or any backplate
  • Attach any size tank
  • Attach to Z-Harness and Z-Plus-Trim Device and mount a tank on your back.
  • Does not come with tank straps (order those separately)

 

 

UTD Signature Series Deluxe Thick Back-Pad and Mounting Strap 

Features and Benefits

  • Comes with 3/4" opencell foam Back pad and attachment Straps and Screws
  • It is neutrally bouyant - Does not add lift, does not compress
  • Fits any backplate - SS/AL/Thick/Thin
  • Fits any UTD style Side-Mount harness - Z-Harness/Razor
  • Can attach weight pouches to 2"webbing strap
  • Soft pad for backplate and side-mount harness comfort

 



UTD Signature Series 6lbs/3Kgs Ditchable/Non-Ditchable Weight Pouches 

Features and Benefits

  • Quick Ditch-able or Non Ditchable weight pouch
  • Attaches quickly and easily to any 2" webbing.
  • The 2" webbing does not have to be threaded through the attachment loop. 
  • Super secure attachment velcro loop for attaching and detaching to your harness webbing
  • Attches anywhere you have 2" webbing - Waist/Hip/Spine/Shoulder
  • Easy to move and attach to adjust trim and weighting
  • Loads up to 6lbs/3kgs per pouch

 


UTD Signature Series Shock-Cord Power Inflator Keeper and Retaining Clip 

Features and Benefits

  • Shock-Cord goes under 2" shoulder webbing comfortably
  • Holds Power Inflator off to the side so as not to interfer with the D-Ring or Stage Tanks
  • Has a slidable retaining clip


 

 

UTD Z-System

 

UTD Z-Plus System

align="center">

Z-System Configuration

Video Blog: Z-System Configuration from Unified Team Diving on Vimeo.

Some Background

 UTD Z-Diving System - A Recreational Side Mounting System from Unified Team Diving on Vimeo.

Fun Cave Diving with the Z-System

 

UTD International LLC Copyright 2011

Real Time Web Analytics